Air Inlet Flaps
Flash 3300
The Flash 3300 is a revolutionary breakthrough in air control. Air direction is not affected by the inlet flaps (air quantity). Over the years, this air intake system has proven its value in hundreds of poultry houses around the world.
Flash 3300 directs fresh air from outside before it enters the hall. The air direction is influenced by adjustable lamellae. These can be adjusted whenever it is desired. The air quantity is adjusted by means of a highly insulated sliding door (22 mm XPS extruded polystyrene).
The air inlet flaps are a suitable solution for several livestock houses: poultry, pigs and calves.
The system is also available in a transparent version (allowing daylight in).
The Flash air inlet system is suitable for situations where a large volume of air needs to be directed to certain points in the house:
- In very wide halls, Flash can guide air over long distances
- It avoids obstacles in the hall such as cages, automatic nests and roof beams.
- No air currents in the automatic nests
| Model | Capacity at 20 Pa | Dimensions (mm) |
|---|---|---|
| Flash 3300 Air inlets | 3300 m³/h | 580x390 |
X-stream
The X-stream inlet flaps are made of a very durable plastic material. The 40 mm thick frame contains dense expanded polystyrene on the inside, which gives it a high degree of thermal insulation.
Two actuation methods are available, via simple spring adjustment. The standard setting for the inlet flap is self-closing, but if you opt for opening, this can be changed very easily.
First, the flap is opening on the upper side, sending all the admission air towards the ridge. After a pre-established period, the air inlet opens on the lower part, too, directing the air admission towards the floor, therefore creating a nice mixture.
The 3 in 1 system allows the gradual individual opening of the 3 air inlets, using only a motor winch. This system creates a deeper airflow when using minimum ventilation.
| Model | Capacity at 20 Pa | Dimensions (mm) |
|---|---|---|
| X-stream Air inlet | 2250 m³/h | 385x355 |
AK 1700
AK1700 inlet flappers are made of the highest quality, durable, anti-UV, anti-UV plastic. The inlets are fitted with a bird and insect screen. The reset spring is made of quality, rust-resistant stainless steel. This model has three opening angles for better ventilation and is fitted with a 20mm polystyrene insulation board to prevent heat loss in the cold season.
| Model | Capacity at 20 Pa | Dimensions (mm) |
|---|---|---|
| AK1700 Air inlets | 1700 m³/h | 560X270 |
AK 2700
The AK2700 air inlets are made entirely of plastic. The frame contains densely expanded polystyrene inside, which gives it a high degree of thermal insulation. They are easy to mount on the wall regardless of the type of material. The damper of the air inlet makes a smooth and easy movement and its shape ensures a correct direction of air flow.
| Model | Capacity at 20 Pa | Dimensions (mm) |
|---|---|---|
| AK2700 Air inlets | 2700 m³/h | 660X310 |
AK 4500
The AK4500 inlet flaps are made of the highest quality, durable, anti-UV, anti-UV plastic. The flaps are equipped with a bird and insect screen and a deflector for individual air routing according to the hall by adjusting the angle of the deflector. The reset spring is made of quality rust-resistant stainless steel.
| Model | Capacity at 20 Pa | Dimensions (mm) |
|---|---|---|
| AK4500 Air inlet | 4500 m³/h | 868x390 |